How Fire Sprinkler Systems Work

The Triangle of Fire

Triangle of Fire

Once a fire has started the most efficient way to extinguish it is by removal of the heat by cooling, water being the favoured medium.

This is generally done by:-

  • Use of a fire extinguisher (if there is one available and a person to operate it)
  • The Fire Brigade, when and if they are called and then 5 to 10 minutes before the first water is applied.

A fire sprinkler will actuate and extinguish the fire automatically whether the building is occupied or not. This will reduce the risk of injury and death and minimise damage due to heat, smoke and water.

In the UK there has been no loss of life in properties where fire sprinklers have been installed, this includes both commercial and residential premises.

How They Work

A fire sprinkler system is a network of piping charged with water either from a water main or fire pump and tank. Fire sprinkler heads are connected to the pipe work in the areas to be protected.

First things first, fire sprinklers are NOT triggered by smoke and do NOT all go off together despite what is shown in movies and TV advertising.

Fire sprinklers are actually heat activated and only the sprinkler head above the fire will actuate. In 98% of cases fires are extinguished by the actuation of just one sprinkler head. If the fire is severe and spreads quickly then the next closest sprinkler head will actuate when the required temperature is reached.

When a fire starts, the resulting smoke will normally actuate a smoke detector which should warn any occupants of the danger. This can take some time depending where the smoke detector is located, in the meantime the fire is growing. A result of a fire is that the air directly above it gets hot. This hot air rises up to the ceiling and is pushed out laterally across the ceiling. When this hot air reaches a sprinkler head, that sprinkler head is actuated.

The temperature required depends on the type of sprinkler head installed but is usually between 68 -74 degrees Celcius

Fire sprinkler systems installed by Triangle Fire Systems have recently actuated and extinguished fires in two residential properties.

  • Student accommodation block, where a chip pan had caught light. The sprinkler system actuation ensured that the damage was confined to smoke damage only.
  • Domestic property, arson attack in an occupied bedroom where the sprinkler head actuated allowing the occupant to escape safely and confining the damage by fire to just 5m2.


CHASE Construction Line
Copyright 2018 Triangle Fire Systems · Optimisation by SEO Manchester Ltd | Website Design East Sussex by Alphastate
February 21, 2018
Triangle Fire Sprinklers Systems
  1. High Rise

  2. Care Homes

  3. Listed/Heritage

  4. Houses & Flats